Eye drop filling/plugging/ cap sealing machine RLEC-90
- Feature:
- Adopt single axle adjusting piston, the request filling volume can be adjusted quickly and precisely.
- The part of piston which contacts with the liquid is made of fine ceramics. Can avoid the contamination and meet the GMP standard.
- Automatic feeding bottle, positioning and operation are controlled automatically.
- The automatic capping is designed according to the sealing mouth of screw cap. The fastening (sealing) range can be adjusted according to the material of cap.
- With safety device, machine will stop automatically when bottle fell down or not in correct position during use the hand-wheel.
- When specification of the bottle is changed. It only needs to change starwheel. The height can be adjusted also. It is very easy to wash & clean.
- Adopt stepless speed variation motor, the operation speed can be adjusted freely.
- It can be run individual or connected with automatic labelling machine and automatic cartoning machine to complete the whole line running in one line production.
- The Monoblock machine is designed for automatic filling, inner plugging and over-capping onto small containers, most suitable for eye-drop and small volume injection liquid production to meet with GMP standards.
Application:
Suitable for eye-drop bottle, cosmetic, pharmaceutical chemical liquid etc filing, plugging and over-capping operations.
Suitable for eye-drop bottle, cosmetic, pharmaceutical chemical liquid etc filing, plugging and over-capping operations.
- Specification:
- Model Type : RLEC-90
- Filling Volume : 2c.c.~20c.c.、15c.c.~40c.c.、30c.c.~60c.c.、50c.c.~100c.c.
- Speed : 35 - 70- bottles/min.
- Motor : 1HP & 60W
- Air Pressure : 4 - 6 kg (Prepared by buyer)
- Vacuum Press Consumption : 220 L/min
- Electric Power : 220V, 50/60 Hz , single phase
- Machine Dimension : (L)1780mm x (W)1675mm x (H)1700mm
- Machine Weight : 950 kgs
- Optional Bottle Feeding Devices:
a. Turn-Table - For Glass Vial or Plastic Bottle. (Maximum: 60O x 100H , 26O x 56H)
b. Vibrator- For Plastic Bottle. (Maximum: 25O x 55H , 13O x 39H)
c. Nitrogen filling.